To Next PageTo Next Page
Need help?Do you have a question about the EcoWater 3200 Series and is the answer not in the manual?
General| Type | Water Softener |
|---|---|
| Flow Rate | 12 gallons per minute |
| Tank Material | Fiberglass |
| Brine Tank Size | Varies by model |
| Power Supply | 120V AC |
Details the warranty terms and coverage for the EcoWater Series 3000 E/D Water System.
Outlines general conditions, limitations, and disclaimers applicable to the water conditioner warranties.
Explains common water properties, impurities like hardness and iron, and their effects.
Discusses the principles of water conditioning and the role of softeners.
Step-by-step guide for assembling rectangular and round brine tanks.
Instructions for connecting components for R20/R30 rectangular tank-in-tank models.
Instructions for assembling the resin tank and controller for R40 and R70 models.
Guidance on choosing the optimal location for installing the EcoWater System unit.
Steps for installing the inlet and outlet fittings and the bypass valve.
Procedures for safely turning off the water supply and ensuring proper electrical grounding.
Steps for testing for leaks, adding water, and filling the brine tank with salt.
Instructions for sanitizing the unit and connecting it to the electrical power supply.
Guide to setting the unit's model code and the current time of day on the timer.
Steps to set water hardness levels and the automatic recharge time.
Explanation of various features like recharge modes, program memory, and daily gallon tracking.
Details on accessing and using secondary timer modes for diagnostics and settings.
Explains the function of the water meter, faceplate timer, and the resin bed's ion-exchange process.
Describes the fill cycle and brining process during regeneration.
Details the backwash and fast rinse steps that clean the resin bed and prepare it for service.
Guidance on salt levels, recommended salt types, and breaking salt bridges.
Information on cleaning the resin bed, adding new resin, and troubleshooting resin issues.
Steps for checking the unit's electronic system and understanding error codes.
Procedures for manually initiating diagnostics and checking regeneration cycles.
Guide to verifying and modifying the unit's model code entry.
Addresses common problems like hard water bypass, drain hose leaks, and salty taste.
