To Next PageTo Next Page
Need help?Do you have a question about the EcoWater ECR3700R30 and is the answer not in the manual?
Outlines warranty periods for parts like tanks, valve body, and electronics.
Assures customer satisfaction and guarantees unit performance, offering replacement for defects.
Detailed specifications for various models including capacity, flow rates, pressure, and component sizes.
Diagrams showing cabinet and two-tank model installations with plumbing and drain connections.
Instructions for unpacking, checking for damage, and assembling the brine tank.
Steps for pressurizing the system, checking for leaks, and performing initial backwash/rinse cycles.
Steps for connecting the softener to a wireless network via WPS or a browser.
Steps to connect a device to the softener's network and access its setup interface.
Configuring system units (English/Metric) and setting the current time on the softener.
Inputting the water hardness value to ensure proper system operation.
Adjusting the iron level and completing the initial setup wizard for Wi-Fi systems.
Instructions for dealers to register a customer's system on the EcoWater web portal.
Setting language, system units, time, hardness, and iron level for non-Wi-Fi systems.
Steps to link the remote control with the main conditioner/refiner unit.
Accessing the main menu to control operations like Recharge, Salt settings, and Basic settings.
Feature to prevent unauthorized modification of performance parameters.
Setting the number of days before a low salt alarm is triggered.
Procedure to manually initiate a recharge cycle to ensure full conditioned water capacity.
Adjusting the scheduled time for automatic recharge cycles.
Inputting water hardness levels for optimal system performance.
Configuring the iron level in the water for automatic compensation.
Setting durations for backwash, second backwash (on/off, time), and fast rinse cycles.
Selecting efficiency modes (Salt Efficient, Auto Adjusting, High Capacity) for optimal salt usage.
Selecting modes for the auxiliary output to control external devices like chlorine generators or feed pumps.
Accessing diagnostic screens to check component states and error codes.
Table listing common problems, their causes, and suggested corrections for troubleshooting.
Explanation of the self-diagnostic function and error code display.
Steps to verify recharge functions like valve position, brine draw, and flow rates.
General| Model | ECR3700R30 |
|---|---|
| Type | Water Softener |
| Flow Rate | 12.0 GPM |
| Regeneration Type | Metered |
| Resin Tank Size | 10" x 35" |
| Power Supply | 120V AC |
