To Next PageTo Next Page
Need help?Do you have a question about the EcoWater ERR3702R30 and is the answer not in the manual?
General| Brand | EcoWater |
|---|---|
| Model | ERR3702R30 |
| Category | Water System |
| Language | English |
Lists parts covered by warranty and their specific time periods, e.g., lifetime, 10 years.
Assures customer satisfaction and unit performance, covering defects and operational issues.
Provides detailed technical data for various EcoWater models, including capacity, flow rates, and pressure limits.
Outlines specific claims related to contaminant reduction and system efficiency, verified by testing.
Steps for pressure testing, rinsing the media, and programming the controller.
Guides through initial setup screens including language and network connection options.
Details connecting the softener to the wireless network via WPS or browser methods.
Steps to connect a device to the softener's temporary Wi-Fi network for setup.
Inputting the water hardness level for optimal system performance and efficiency.
Setting the iron level in water and confirming the setup completion status.
Guides on how to create an account and register the softener on the EcoWater web portal.
Step-by-step guide for new customers to create an account on the EcoWater website.
Guides through initial setup screens including language, system units, and time for non-Wi-Fi models.
Setting water hardness and iron levels for the non-Wi-Fi system's operation.
Steps to initiate and establish a communication link between the remote and the unit.
Detailed procedure for connecting the remote to the conditioner/refiner through its menu interface.
Step-by-step process to add the conditioner/refiner or other devices to the remote's system.
Steps to manually start a recharge cycle using the HydroLink remote.
Details special messages like low salt, service reminders, and error conditions displayed by the unit.
How to display the main menu from the rolling status screens on the unit's control panel.
Lists all available operations and settings accessible through the main menu, with page references.
Steps to turn on the lockout feature to prevent unauthorized parameter changes.
Steps to turn off the lockout feature, allowing parameter changes to be made.
How to set or disable the low salt alarm notification and customize days before depletion.
Steps to manually start a recharge cycle for increased conditioned water supply.
Inputting the water hardness level for optimal system performance and efficiency.
Configuring the iron level in the water supply for automatic compensation by the control.
Setting backwash time, second backwash enable, and fast rinse times.
Configuring efficiency modes like Salt Efficient, Auto Adjusting, or High Capacity for salt usage.
Programming the unit to display a service reminder message after a set period of months.
Viewing diagnostic screens to check operating states of components and identify issues.
Lists common issues like no soft water, hard water, and error codes with their causes and corrections.
Explains the unit's self-diagnostic function and error code display for fault identification.
Comprehensive list of part numbers and descriptions for the valve assembly.
