EcoWater ERR3702R30 - Main Menu Operations; Accessing the Main Menu; Menu Options Overview

29
ECOWATER
S Y S T E M S
Conditioner/Refiner Operation
Recharge
Salt settings
B
asic settings
Main menu
FIG. 84
MAIN MENU
During normal operation (status screens rolling), press
the conditioner/refiner’s SELECT (¡) button to display
the Main menu (See Figure 84). This menu and its
subsidiary screens are used to control these operations:
=R
echarge (See Page 32)
=Salt settings
=Low salt alarm (See Page 31)
=Salt type (See Page 31)
=Basic settings
=Current time (See Page 32)
=Hardness (See Page 33)
=Iron level (See Page 33)
=Recharge time (See Page 33)
=Rolling screens (See Page 34)
=User preferences
=Language (See Page 34)
=Time format (See Page 35)
=Volume units (See Page 35)
=Hardness units (See Page 35)
=Weight units (See Page 35)
=System information
=Model information (See Page 36)
=Wireless information (See Page 36)
=Water available (See Page 36)
=Daily avg. water used (See Page 36)
=Water used today (See Page 36)
=Total water used (See Page 36)
=Current water flow (See Page 36)
=Days powered up (See Page 36)
=Last recharge (See Page 36)
=Total recharges (See Page 36)
=Advanced settings
=Cycle times
=Backwash time (See Page 37)
=2nd backwash (On/Off) (See Page 37)
=2nd backwash time (See Page 37)
=Fast rinse time (See Page 37)
=Special features
=Efficiency mode (See Page 38)
=Max. days between recharges (See Page 38)
=Auxiliary control (See Page 39)
=Chemical feed volume

(See Page 39)
=Chemical feed timer

(See Page 39)
=97% feature (See Page 38)
=Water to drain sensor

(See Page 40)
=Service reminder (See Page 40)
=Troubleshooting
=Diagnostics (See Page 41)
=Setup changes (See Page 41)
=SLS calibration (See Page 41)
=Wireless setup (See Pages 13-15) on Wi-Fi sys-
tems OR Connect to remote (See Page 19)
 Only displayed if Auxiliary control is set to Chemical feed.
 Only on Wi-Fi systems.