To Next PageTo Next Page
Need help?Do you have a question about the EcoWater ECR3702R70 and is the answer not in the manual?
General| Brand | EcoWater |
|---|---|
| Model | ECR3702R70 |
| Category | Water System |
| Language | English |
Information regarding compliance with FCC rules for digital devices and potential radio frequency interference.
Instructions for unpacking the conditioner/refiner, checking for damage, and managing packing materials.
Guidance on installing the bypass valve assembly or copper tubing for water connections.
Steps for plumbing a three-valve bypass system to allow for isolation of the unit.
Instructions for measuring, cutting, and assembling pipe and fittings for water inlet/outlet.
Procedures for pressure testing, programming the controller, and rinsing the media after installation.
Instructions for adding the correct amount of water and salt to the brine tank.
Steps for sanitizing the water conditioner/refiner to prevent bacterial growth.
Configures the system's connection to a wireless network via WPS or browser.
Guides the user to connect using a web browser on a separate device.
Instructions for dealers to register a customer's system on the EcoWater web site.
Steps for new customers to create an account and register their system on the EcoWater web site.
Sets the water hardness level for optimal system performance.
Sets the water iron level for optimal system performance.
Instructions for initiating a manual recharge of the water conditioner/refiner using the remote.
Allows setting the preferred time for automatic recharge cycles via the remote.
Allows programming or disabling the low salt alarm and setting the notification period.
Instructions for setting or adjusting the current time on the conditioner/refiner's control.
Allows setting the preferred time for automatic recharge cycles.
Sets the water hardness level for optimal system performance.
Sets the water iron level for optimal system performance.
Selects an operating mode to optimize salt usage or capacity.
Selects the mode for the auxiliary output to control external devices.
Sets volume and timer for chemical feed equipment when auxiliary control is enabled.
Programs or resets the reminder for scheduled service intervals.
Instructions for accessing the diagnostics screen to check operating states and error codes.
Guidance on adding salt, recommended types, and handling potassium chloride.
Describes how to identify and break a salt bridge that forms in the brine tank.
Instructions for cleaning the nozzle and venturi assembly, essential for brine suction.
Recommends regular resin bed cleaning to prevent iron coating.
Explains the unit's self-diagnostic function and error code display.
Procedures for checking the turbine's rotation and sensor function.
Verifies operation of position switch, gear motor, brine draw, and flow rates.
