Need help?Do you have a question about the EcoWater R20 and is the answer not in the manual?
General| Brand | EcoWater |
|---|---|
| Model | R20 |
| Category | Water System |
| Language | English |
Information on the performance guarantee bond from Continental Casualty Company.
Explains the origin and impurities found in natural water sources.
Identifies the four main water conditions requiring treatment.
Guides on setting the current time and day of the week.
Instructions for setting regeneration days and start times.
Details on adjusting the fill cycle minutes for regeneration.
How to set the double backwash cycle for iron bearing water.
Initiates immediate regeneration when water usage is high.
Disables regeneration during extended absences.
Explains memory retention during power interruptions.
Details the process of filling the brine tank for regeneration.
Explains how brine cleans the resin bed during regeneration.
Describes rinsing the resin bed after brining to remove minerals.
Details the upward flow of water to flush the resin bed.
Explains the final rinse to pack the resin bed for service.
Guidance on checking and refilling the brine tank with salt.
Instructions for cleaning essential components for proper operation.
How to identify and resolve salt bridging in the brine tank.
Procedures for cleaning the resin bed to remove iron.
Guidelines for replacing or adding resin to the tank.
Step-by-step guide to manually advance unit cycles for diagnosis.
Addresses hard water bypass, drain leaks, and salty taste.
Explains error codes and self-diagnostic functions of the unit.
Illustrated breakdown of the main unit components.
Detailed parts list for the valve assembly.
To Next Page