When the ECOXGEAR selection
is made and the Bluetooth
connection is completed,
your EcoDrift will announce:
“Connection successful”
Once connected, select and play
your desired audio.
Pairing Mode: If the LED is not
flashing or if you wish to place
your EcoDrift in pairing mode,
press and release the Bluetooth
button on the top panel. Your
EcoDrift shall announce “Ready
to connect” when ready to pair to
a new device.
NOTE: Your EcoDrift shall sync
& wirelessly pair with most
Bluetooth enabled devices. The
unit remembers the last device
paired and will automatically
search for previous connections
when the speaker is turned on or
when a device comes back into
Bluetooth range. If a connection
is lost due to range, the speaker
To Next Page
Loading...
