30
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
f Primary/Secondary/Third IDE Master/Slave
Your computer has one IDE channel and each channel can be installed with one or two
devices (Master and Slave). In addition, this motherboard supports four SATA channels and
each channel allows one SATA device to be installed. Use these items to configure each
device on the IDE channel.
Floppy A
These items set up size and capacity of the floppy diskette drive(s) installed in the
system.
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Standard CMOS Setup
Press <Esc> to return to the main menu setting page.
Advanced Setup
This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Advanced Setup
System Time 14: 02: 44
System Date Wed 05/05/2004
f
Primary IDE Master Not Detected
f
f
f
Primary IDE Slave Not Detected
Secondary IDE Master Not Detected
Use [ENTER], [TAB]
or [SHIFT-TAB] TO
select a field.
Use [+] or [-] to
configure system Time.
Help Menu
Secondary IDE Slave Not Detected
Third IDE Master Not Detected
Third IDE Slave Not Detected
Floppy A 1.44 MB 3
1
/
2
”
f
f
: Move
F10: Save
F1: General help
+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F8:Best Performance Settings
mnkl
Quick Boot Enabled
1st Boot Device HDD:SS-ST3120026AS
2nd Boot Device CD/DVD:3M-Pioneer D
3rd Boot Device 1st Floppy Drive
Try Other Boot Device Yes
Bootup num-Luck On
Configure DRAM timing by SPD Enabled
Hyper Threading Tecnnology Enabled
Max CPUID Value Limit Disabled
DDR Voltage Control Normal
PCI-E Voltage Control Normal
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Help Menu
mnkl
: Move
F10: Save
F1: General help
+/-/: Value
Enter : Select ESC: Exit
F9: Optimized DefaultsF8:Best Performance Settings
To Next Page
Loading...
Need help?
General
