55
Hybrid Graphics
®
Technology Support
Chapter 5
Hybrid Graphics
®
Technology Support
Hybrid Graphics
®
Technology
The Hybrid Graphics
®
technology provides significant display performance boost
to AMD-based systems by inserting the external PCI Express graphics card and
enabling both the discrete GPU and the RS780 graphics core to render simultaneously
in Hybrid CrossFire
TM
mode.
Follow the steps below to start the Hybrid Graphics
®
technology.
1.Insert a graphics card (which can be used for Hybrid Graphics
®
technology, such as
HD3400 series) into the PCIEX16 slot.
Make sure that the card is properly seated on the slot.
2. For Hybrid Graphics
®
, if display by PCI-Express, you must enter the BIOS, set the
Surround View in Advanced Chipset Setup to PCI Express. Then press F10 to save
the configuration and exit the BIOS. After entering OS, enter Catalyst Control Center
to enable Hybrid CrossFire
TM
.
To Next Page
Loading...
Need help?
General
