38
Using BIOS
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
-=- System Hardware Monitor-=-
Smart Fan Function Press Enter
Shutdown Temperature Disabled
CPU Temperature : 40°C/104°F
System Temperature : 32°C/89°F
CPU Fan Speed : 1991 RPM
System Fan Speed : N/A
PWR Fan1 Speed : N/A
PWR Fan2 Speed : N/A
CPU Vcore : 1.312 V
VDIMM : 1.792 V
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
SMART Fan Control (Enabled)
Smart Fan Function
Scroll to this item and press <Enter> to view the following screen:
SMART Fan start PWM value (40)
SMART Fan start TEMP. (°C) (50)
This item is used to set the start PWM value of the smart fan.
This item is used to set the start temperature of the smart fan.
This item allows you to enable or disable the control of the system fan speed by
changing the fan voltage.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Help Item
SMART Fan Control Enabled
SMART Fan start PWM value 40
SMART Fan start TEMP. (°C) 50
DeltaT1 +3
SMART Fan Slope PWM value 4 PWM value/°C
SMART Fan2 Control Disabled
Disabled
Enabled
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
Options
To Next Page
Loading...
Need help?
General
