34
Using BIOS
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
Internal Graphics Mode (UMA)
Use this item to choose the onboard VGA mode. You can select [Disabled] to disable
the onboard VGA, [UMA] to use the system memory.
GFX Clock Override (Disabled)
Use this item to enable or disable GFX Clock Override.
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
Press <Esc> to return to the main menu setting page.
Warning: If Disabled Internal Graphics Mode, please Loading default to
Enable it.
This item is used to select the DCT mode (DRAM Controller mode).
Init Display First (PCI)
DCT Unganged Mode (Always)
F9: Optimized Defaults
F1:General Help
Options
Disabled
UMA
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
Internal Graphics Mode UMA
GFX Clock Override Disabled
Share Memory Size Auto
Init Display First PCI
HDMI Audio Enabled
DCT Unganged Mode Always
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select: Move
Use this item to select which graphics controller to use as the primary boot devices.
HDMI Audio (Enabled)
This item is used to enable or disable the NB HDMI audio support.
Share Memory Size (Auto)
To Next Page
Loading...
Need help?
General
