57
AMD RAID Configuration
Select [2], then select LD 1 in the following page.
3
The Main Menu screen appears (Figure 1.4).
Figure 1.4 Main Menu
The Define LD Menu screen appears (Figure 1.5).
Figure 1.5 Define LD Menu
Using the Define a New Array Screen
If necessary, press the tab key to move from field to field until the appropriate field
is highlighted.
• Selecting the RAID Mode
By default, this is set to Mirroring. To change to a different RAID mode,
press the spacebar until the mode that you want appears in the RAID Mode
box—RAID0/1/10/JBOD.
Note: Not all RAID levels are supported on all platforms.
To Next Page
Loading...
