ECS H67H2-M v 1.1 User Manual

38
Using BIOS
USB Configuration
Scroll to this item and press <Enter> to view the following screen:
All USB Devices (Enabled)
Use this item to enable or disable all USB devices.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting toAudio
allows the system to detect the presence of the USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Press <Esc> to return to the Advanced Menu page.
USB Configuration
All USB Devices [Enabled]
USB 3.0 Controller [Enabled]
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enabled/Disabled All USB
Devices
Legacy USB Support [Enabled]
Main Advanced Chipset M.I.B III Boot Security Save & Exit
+/- : Change Opt.
Enter : Select
F1: General Help
“¤
«‹
:Select Screen
:Select Item
F2: Previous Values
F3: Optimized Defaults
ESC: Exit
F4: Save & Exit
USB 3.0 Controller (Enabled)
Use this item to enable or disable USB 3.0 controller. We recommand users keep the
default value. Disabling it might cause the USB devices not to work properly.

ECS H67H2-M v 1.1 Specifications

General

Brand	ECS
Model	H67H2-M v 1.1
Category	Motherboard
Language	English