ECS H67H2-M3 Manual User Manual

51
Using BIOS
This page enables you to set the keyboard NumLock state.
Boot Menu
Boot Configuration
This item shows the information of the boot configuration.
Bootup NumLock State (On)
This item determines if the NumLock key is active or inactive at system start-up
time.
Quiet Boot (Enabled)
If enebled, BIOS will show a full screen logo at boot, if disabled, BIOS will set the
initial display mode to BIOS and show the diagnostic POST screen at boot.
Boot Option Priorities
This item enables you to select boot priorities for all boot devices.
+/- : Value
Enter : Select


:Select Screen
:Select Item
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Select the keyboard NumLock
state
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot [Enabled]
Boot Option Priorities

ECS H67H2-M3 Manual Specifications

General

Brand	ECS
Model	H67H2-M3 Manual
Category	Motherboard
Language	English