ECS KAM1-I

Chapter 2
21
KAM1-I USER MANUAL
1. SYS_FAN (System Cooling FAN Power Connector) & 2. CPU_FAN (CPU cooling
FAN Power Connector)
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
Connect the system cooling fan connector to SYS_FAN.
Connect the CPU cooling fan cable to CPU_FAN.
2-4-5. Connecting Case Components
No. Components No. Components
1 SYS_FAN 4 F_PANEL
2CPU_FAN5 BZ
3 ATX_POWER ~~ ~~