EasyManua.ls Logo

ECS NFORCE3-A - Advanced BIOS Features

ECS NFORCE3-A
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Using BIOS
Advanced BIOS Features
This option defines advanced information about your system.
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
X
X

F5:Previous Values F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Hard Disk Boot Priority [Press Enter]
Virus Warning [Disabled]
Quick Power On Self Test [Enabled]
Boot Up NumLock Status [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Security Option [Setup]
APIC Mode [Enabled]
MPS Version Control For OS [1.4]
OS Select For DRAM > 64MB [Non-OS2]
Small Logo (EPA) Show [Enabled]
Summary Screen Show [Disabled]
Cache Setup [Press Enter]
Boot Seq & Floppy Setup [Press Enter]
Select Hard Disk Boot
Device Priority
Virus Warning (Disabled)
When enabled, this item provides protection against viruses that try to write to the boot sector and partition table of your hard
disk drive. You need to disable this item when installing an operating system. We recommend that you enable this item as
soon as you have installed an operating system.
For complete protection against viruses, install virus software in your oper-
ating system and update the virus definitions regularly.
Quick Power On Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Hard Disk Boot Priority (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Item Help

Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
Use < > or < >
to select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
1. Pri. Master:
2. Pri. Slave:
3. Sec. Master:
4. Sec. Slave:
5. USBHDD0:
6. USBHDD1:
7. USBHDD2:
8. Bootable Add-in Cards

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

Related product manuals