ECS NFORCE3-A - Integrated Peripherals

35
Using BIOS
Integrated Peripherals
These options display items that define the operation of peripheral components on
the system’s input/output ports.
Item Help

Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Integrated Peripherals



IDE Function Setup [Press Enter]
Onboard Device [Press Enter]
Super IO Device [Press Enter]
OnChip IDE Channel0 [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
OnChip IDE Channel1 [Enabled]
Secondary Master PIO [Auto]
Secondary Slave PIO [Auto]
Secondary Master UDMA [Auto]
Secondary Slave UDMA [Auto]
IDE Prefetch Mode [Enabled]
Init Display First [PCI Slot]
IDE DMA transfer access [Enabled]
IDE HDD Block Mode [Enabled]
POWER ON Function [Hot Key]
F5:Previous Values F7:Optimized Defaults

F5:Previous Values F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
123
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
123
IDE RAID (Disabled)
This item allows you to enable or disable the onboard RAID function of RAID supporting
devices.
• IDE Channel0/1 Master/Slave RAID (Disabled): These four items enable
or disable the IDE Primary/Secondary RAID.
• SATA Primary/Secondary Master RAID (Disabled): These two items
enable or disable the SATA Primary/Secondary RAID.
Press <Esc> to return to the Advanced Chipset Features page.
IDE Function Setup (Press Enter)
Scroll to this item and press <Enter> to view the following screen:


: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Item Help

Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
IDE Function Setup
IDE RAID [Disabled]
IDE Channel0 Master RAID Disabled
IDE Channel0 Slave RAID Disabled
IDE Channel1 Master RAID Disabled
IDE Channel1 Slave RAID Disabled
SATA Primary Master RAID Disabled
SATA Secondary Master RAID Disabled
X
X
X
X
X
X