36
Using BIOS
Onchip USB (V1.1+V2.0)
This item enables users to enable or disable the onchip USB function, setting it to be USB1.1
or USB2.0 compatible.
USB KB/Storeage Support (Enabled)
This item lets you enable or disable the USB Keyboard/Storage device support.
USB Mouse Support (Disabled)
Enable this item if you plan to use a mouse connected through the USB port in a legacy
operating system (such as DOS) that does not support Plug and Play.
Serial-ATA 2 (Internal PHY) (Enabled)
This item allows you to enable or disable the onboard SATA 1/2 devices.
AC’ 97 AUDIO (Auto)
Enables and disables the onboard audio chip. Disable this item if you are going to install a
PCI audio add-in card.
MAC Lan (nVIDIA) (Auto)
This option allows you to enable/disable the Onboard LAN controller.
Onboard Lan Boot ROM(Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network add-in
card with a remote boot ROM installed.
MAC Media Interface(RGMII)
This option allows you to MAC Media interface, the choices are Pin Strap, MII and
RGMII.
Onboard Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Onboard Device
OnChip USB [V1.1+V2.0]
USB KB/Storeage Support [Enabled]
USB Mouse Support [Disabled]
Serial-ATA 2 (Internal PHY) [Enabled]
AC97 Audio [Auto]
MAC Lan (nVIDIA) [Auto]
Onboard Lan Boot ROM [Disabled]
MAC Media Interface [RGMII]
F5:Previous Values F7:Optimized Defaults
Press <Esc> to return to the Integrated Peripherals page.
To Next Page
Loading...
