24
Using BIOS
SATA1~2
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
SATA1
Help Item
Select the type
of device connected
to the system.
This motherboard supports two SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
SATA1
Type Auto
PIO Mode Auto
DMA Mode Auto
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default SettingsF1: General Help
For the purpose of better product maintenance, the manufacture reserves
the right to change the BIOS items presented in this manual. The BIOS
setup screens shown in this chapter are for reference only and may differ
from the actual BIOS. Please visit the manufacture’s website for updated
manual.
Standard CMOS Setup
This option displays basic information about your system.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Date(www mm :dd:yy) Mon 09/13/2010
Time (hh:mm:ss) 02 :22:19
SATA1 Not Detected
SATA2 Not Detected
IDE BusMaster Enabled
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
To Next Page
Loading...
Need help?
General
