34
Using BIOS
Load Default Settings
This option opens a dialog box that lets you install stability-oriented defaults for all
appropriate items in the Setup Utility. Select <OK> and then press <Enter> to install
the defaults. Select <Cancel> and then press <Enter> to not install the defaults.
Frequency/Voltage Control
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Frequency/Voltage Control
Help Item
Manufacturer: Intel
CPU Host Ratio 9
Auto Detect DIMM/PCI CIK Enabled
Spread Spectrum Enabled
Options
Disabled
Enabled
Manufacturer: Intel
This item displays the information of current manufacturer of the CPU installed in
your computer.
CPU Host Ratio:9
This item shows ratio of the CPU Host installed in your system.
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
Press <Esc> to return to the main menu setting page.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
To Next Page
Loading...
Need help?
General
