Ectaco iTRAVL - Font Size; Key Tone; Slang Lock

ECTACO iTRAVL User Manual
22
Note: To confirm changes, tap the
button at the upper right of
the screen.
Font Size
ECTACO iTRAVL TL-2 offers you three font sizes.
• Under Font size, tap Small, Medium, or Large. A check mark
will indicate your selection.
Key Tone
• Tap on Key tone to turn it on/off. A check mark indicates that
the option is selected. This feature is designed to produce a short
beep every time you press a key on the device's keyboard.
Slang Lock
Using this feature you can hide slang words or phrases contained
in the dictionaries. Slang lock is on by default.
• Tap on Slang lock to disable/enable it.
Note: When disabling Slang lock, you will be prompted to enter
the password: showslan.
Inverse backlight
• Tap on Inverse backlight to change the backlight mode. A
check mark indicates that the option is selected. Press the
Backlight button to make sure the backlight mode has changed.
Contrast, Auto-off Time, Speaker Volume,
Microphone Sensitivity
• Tap on the Contrast chart to adjust screen contrast. You will
see the screen getting darker or brighter.
• Tap on the Auto-off chart to adjust the auto-off time, which can
be set to 1 to 15 minutes. This feature saves battery life by
shutting the device down after the specified period of inactivity.
• Tap on the Volume chart to adjust speaker volume. Press Say
to check the adjustment while listening to the phrase This is a
test.
• Tap on the Microphone chart to decrease or increase
microphone sensitivity.