ECTIVE MI 25 - Remote control

[
ECTIVE
®
POWER INVERTER – MI-/TMI-SERIES
]
33
Remote control
The remote control is connected by the three meter long RJ12 (ISDN cable) connection
cable.
☝ Please note!
The remote is paralleled to the on/off button of the inverter. For a reasonable use of the
remote the inverter has to be switched off.
Please use only original ECTIVE accessories.
⚠ Caution!
Possible malfunctions
Only lay the remote control cable separately from live cables. Failure to do so may
cause interference and interfere with the remote control function.