Need help?Do you have a question about the ECTIVE SSI 20 and is the answer not in the manual?
General| Model | SSI 20 |
|---|---|
| Output Power | 2000W |
| Peak Power | 4000W |
| Input Voltage | 12V DC |
| Output Voltage | 230V AC |
| Waveform | Pure Sine Wave |
| Efficiency | 90% |
| Frequency | 50 Hz |
| Type | Pure sine wave |
| Protection | Overload, Overheat, Short Circuit |
| Cooling | Fan |
Failure to comply with these instructions could result in death or serious injury.
Failure to comply with these instructions can cause functional impairment or damage of the device.
The ECTIVE inverter of the SI/TSI-series are generally build for so called “Off-Grid”-Systems.
Safety warning about the risk of electric shocks and protective earth connection.
Specifies user limitations and supervision requirements for the product.
Guidelines for safe and compliant installation by trained personnel.
Crucial instructions for safe mounting to prevent fire, injury, and electric shock.
Troubleshooting steps for when the inverter is on but shows no output or status.
Diagnosing and resolving issues indicated by a single acoustic signal.
Interpreting and correcting errors indicated by 2x acoustic signals and LED flashes.
Troubleshooting for charger not working or supplying low current.
To Next Page
