Need help?Do you have a question about the ECTIVE SSI Series and is the answer not in the manual?
General| Output Voltage | 230V AC |
|---|---|
| Waveform | Pure Sine Wave |
| USB Output | 5V / 2.1A |
| Input Voltage | 12V / 24V DC |
| Remote Control | Optional |
| Output Frequency | 50Hz |
| Protection Features | Overload, Overheat, Short Circuit, Low Voltage, High Voltage |
| Cooling | Fan Cooling |
| Operating Temperature | -20°C to 50°C |
| Output Power | 1000W |
| Continuous Power | 1000W |
| Peak Power | 2000W |
Lists available accessories and models for CSI and SSI series inverters.
Defines the proper and safe application of the ECTIVE inverter.
Specifies user limitations and supervision requirements for safe operation.
Provides essential safety rules and recommendations for equipment installation.
Key instructions for mounting the inverter to prevent fire and shock hazards.
Important safety precautions during mounting, operation, and maintenance.
Outlines the step-by-step process for safely starting up and commissioning the inverter.
Illustrates functional diagrams for various UPS mode scenarios of the SSI series.
Provides detailed descriptions for each UPS mode scenario, explaining system behavior.
Explains safety features like over/undervoltage protection and restart procedures.
Lists conditions that cause the inverter to disconnect the AC output.
Details error types, voltage thresholds, and corresponding actions for various faults.
Provides solutions for common issues like no output voltage or acoustic signals.
Offers solutions for specific signal and LED error indicators.
To Next Page
