Need help?Do you have a question about the ECTIVE SI Series and is the answer not in the manual?
General| Waveform | Pure Sine Wave |
|---|---|
| Efficiency | >90% |
| USB Output | 5V/2.1A |
| Input Voltage | 12V / 24V / 48V DC (depending on the model) |
| Output Frequency | 50Hz |
| Protection Features | Overload, overvoltage, overtemperature, short circuit |
| Cooling | Fan |
| Dimensions | Varies depending on the model. |
| Weight | Varies depending on the model. |
Formal summary of warning, caution, and note symbols used in the manual.
Emphasizes safety when installing battery cables to prevent overheating and fire hazards.
Lists available accessories for the SI and TSI-Series inverters.
Advises on off-grid system use and correct input voltage connection.
Identifies and labels external components for SI 3, SI 5, and SI 10 inverters.
Identifies and labels external components for SI 15, SI 20, and SI 25 inverters.
Identifies and labels external components for TSI 5, TSI 10, TSI 15, TSI 20, and TSI 25 inverters.
Summarizes key operating parameters like power indication, switching time, and voltage.
Details idle current consumption and efficiency range for SI/TSI models.
Specifies environmental limits and provides operational tips like starting current.
Covers user limitations, installation by trained personnel, and safe mounting practices.
Details operational safety, cleaning, and correct cable management for hazard prevention.
Guides on commissioning the inverter and protecting batteries during prolonged non-use.
Explains the effects of different battery connection types on voltage and capacity.
Lists power, dimensions, and empty weight for SI and TSI series models.
Details protection against overload/undervoltage and the risk of battery discharge in standby.
Identifies causes and actions for voltage, overheating, and short circuit errors.
Addresses initial setup errors and troubleshooting based on acoustic signals.
Provides solutions for multiple fault indicators and overload conditions.
Outlines warranty claim procedures and conditions that exclude liability for damages.
Guides on responsible disposal of packaging material and the electronic device.
Details warranty duration, scope, exclusions, and the claim process.
To Next Page
