ECTIVE CSI Series - User Manual

POWER INVERTER
PURE SINEWAVE
Montage- und
Bedienungsanleitung
Installation and
Operating Instructions
CSI Series
SSI Series

ECTIVE CSI Series Specifications

General

Waveform	Pure Sine Wave
Efficiency	>90%
USB Output	5V/2.1A
Input Voltage	12V / 24V
Protection Features	Overload, Short Circuit, Over Temperature
Operating Temperature	-20°C - +50°C
Dimensions	Varies by model
Weight	Varies by model
Cooling	Fan Cooling

Summary

What is an inverter?

Explanation of Symbols

Scope of Supply

Recommended Battery Cables and Capacity

Accessories (Sold Separately)

Intended Use

Overview of the Inverter

Front View: CSI 3

Details the front panel components and ports for the CSI 3 model.

Front View: CSI 5 and CSI 10

Details the front panel components and ports for CSI 5 and CSI 10 models.

Front View: CSI 15, CSI 20 and CSI 25

Front View: CSI 30

Terminal for Direct Connection (CSI 30 and SSI-Series)

Front View: SSI 10 to SSI 30

Operating Conditions

Everything at a Glance

Presents a summary of key operating specifications and conditions in a table format.

Idle Current Consumption CSI-Series

Idle Current Consumption SSI-Series

AC-Charger Power Specifications

Efficiency and Performance Data

Recommended Surrounding Conditions

General Safety and Installation Notes

Commissioning of the Inverter

Wintering; Prolonged Non-Utilization

Possible Configurations of Batteries

Technical Information

Functional Diagrams of Charger;MPPT-Solar Charge Controller

General Information about Charging Function

Describes the inverter's ability to supply batteries and loads from solar and shore power.

Explanation of Charging Phases

Functional Diagram SSI-Series (12 V Device)

ECO Mode

UPS Mode

Safety Features

Self Error Correction

Guarantee

Disposal