ECTIVE CSI Series User Manual

ECTIVE CSI & SSI Series 37
Intended use
Warning!
Fire hazard!
The ECTIVE inverter of the SI/TSI-series are generally build for so called “Off-Grid”-Sys-
tems and should only be used autonomously. Do not connect the inverter output (socket)
with an other voltage source. All models with a mains priority circuit should be connected
with a power supply only through the provided AC-input. Disregarding this advice is life
threatening and will destroy the inverter immediately.
Caution!
The inverter should not be used in vehicles, in which the +pole is connected to the
chassis!
Caution!
Please mind the input voltage!
The inverter should only be connected to voltage sources which correspond to following
provisions. 12 V=12 V, 24 V= 24 V
If connected to a higher voltage source the fuse can immediately blow and destroy the
inverter.

ECTIVE CSI Series Specifications

General

Brand	ECTIVE
Model	CSI Series
Category	Inverter
Language	English