ECTIVE CSI Series User Manual

42 ECTIVE CSI & SSI Series
Caution!
Please note the maximum power of the electronic devices!
For currents >15 A electronic devices have to be connected directly to the terminal for
direct connections.
Warning!
Risk of electric shocks
The device is always equipped with security features to prevent dangerous electronic
shocks.
However, in order to ensure the highest possible safety during operation, it is impera-
tive that the inverter’s ground connection be connected to a protective earth (usually
green-yellow cable) in any case.
Operating conditions
Everything at a glance
Power indication proportional to the
continuous output indicated in
120% – 150% for 10 seconds
150% – 200% for 2 seconds
Switching time UPS (both series) <16 ms
AC voltage 230V
AC voltage fluctuation: max. 10%
Frequency: 50 Hz ± 1Hz
Waveform Pure sine wave (THD < 4%) at rated input
voltage
Battery types Wet, AGM, GEL, Li-Ion (only with BMS)

ECTIVE CSI Series Specifications

General

Waveform	Pure Sine Wave
Efficiency	>90%
USB Output	5V/2.1A
Input Voltage	12V / 24V
Protection Features	Overload, Short Circuit, Over Temperature
Operating Temperature	-20°C - +50°C
Dimensions	Varies by model
Weight	Varies by model
Cooling	Fan Cooling