ECTIVE CSI 20 - User Manual

POWER INVERTER
PURE SINEWAVE
Montage- und
Bedienungsanleitung
Installation and
Operating Instructions
CSI Series
SSI Series

ECTIVE CSI 20 Specifications

General

Input Voltage	12V DC
Output Voltage	230V AC
Frequency	50 Hz
Cooling	Fan
Protection Features	Overload, Short Circuit, Low Voltage, Over Voltage
USB Ports	5V/2.1A

Summary

Scope of supply

Reccomended battery cables and battery capacity

Intended use

Operating conditions

Everything at a glance

Idle current consumption

Recommended surrounding conditions

General safety instructions and installation notes

Commissioning of the inverter

Wintering; prolonged non-utilization

Possible configurations of batteries

Technical information

Functional diagrams of charger;MPPT-solar charge controller

Explanation of charging phases CSI- and SSI-series

Describes the three charging stages (Bulk, Absorption, Float) and their characteristics for CSI and SSI series.

Functional diagram SSI-series (illustration of a 12 V-device)

Illustrates the operational scenarios and battery voltage changes for the SSI series in UPS mode.

ECO Mode

UPS Mode

Safety features

Self error correction

Additional possible errors of inverter with integrated charger