ECTIVE MI 25 - Technical description and basic information; Safety features

[
ECTIVE
®
POWER INVERTER – MI-/TMI-SERIES
]
42
Technical description and basic information
Model- Power Dimensions (LxWxH) Empty weight
MI30 300 W 165 × 105 × 55 mm 0,9 kg
MI50 500 W 190 × 105 × 55 mm 1,2 kg
MI100 1000 W 210 × 150 × 70 mm 2,5 kg
MI150 1500 W 250 × 220 × 90 mm 4,7 kg
MI200 2000 W 290 × 220 × 90 mm 5,5 kg
MI250 2500 W 320 × 220 × 90 mm 6,2 kg
MI300 3000 W 320 × 220 × 150 mm 6,4 kg
TMI100 1000 W 300 × 150 × 75 mm 2,6 kg
TMI150 1500 W 380 × 220 × 95 mm 4,9 kg
TMI200 2000 W 410 × 220 × 95 mm 5,7 kg
TMI250 2500 W 440 × 220 × 95 mm 6,5 kg
TMI300 3000 W 480 × 220 × 150 mm 6,7 kg
Safety features
☝ Please note!
Restart necessary!
The inverter is equipped with several safety features to protect the inverter and all its
components as for example the batteries.
The inverter is equipped with a thermic and electronic over-/undervoltage protection. If
the required values are exceeded or not reached, the device disconnects the AC output
and must be switched off and on again before restarting via the ON/OFF switch.
⚠ Caution!
The device remains switched on when the AC output is disconnected. There is a risk of
deep discharge of connected batteries due to the power consumption of this standby
mode.