[
ECTIVE
®
POWER INVERTER – MI-/TMI-SERIES
]
28
Contin-
uous
output
Model
MI-/TMI-
Input
voltage
recommended
battery cabel*
Battery
capacity**
2500 W 252 12 V 16 mm², 2 sets ≥400 Ah
254 24 V 10 mm², 2 sets ≥200 Ah
258 48 V 6 mm², 2 sets ≥100 Ah
3000 W 302 12 V 16 mm², 2 sets ≥480 Ah
304 24 V 10 mm², 2 sets ≥240 Ah
308 48 V 6 mm², 2 sets ≥120 Ah
* One set contains one positive and one negative wire.
** Recommended capacity of the batteries during permanent power.
ѥ Warning!
Fire hazard!
If 2 sets of battery cables are recommended, both sets must also be installed. Failure
to do so can easily lead to overheating of the overloaded cables and connection points
and cause a dangerous cable fire.
⚠ Caution!
Please note the capacity!
An underrun of the recommended battery capacity can cause a loss of performance or
serious use restrictions as a result of voltage drops.
⚠ Caution!
Please respect a sufficient ventilation!
The inverter produces heat loss. The device is equipped with a thermal overload pro-
tection. An insufficient ventilation can affect the function of the inverter, because the
inverter can shut itself down for safety reasons.
To Next Page
Loading...
