SD3 Series Ultrasonic Pocket Doppler User Manual Examining
- 26 -
NOTE:
When applied to the patient, the ultrasound transducer may warm slightly (less than 6°C
(10.8°F ) above ambient temperature). When NOT applied, the ultrasound transducer
may warm slightly (less than 6°C (10.8°F ) above ambient temperature).
4.5 Completing Examining
After examining,
1) Switch off the Doppler.
2) Wipe the remaining gel off the patient and the probe with a clean soft cloth or tissue.
3) Place the probe back to the holder.
To Next Page
Loading...
Need help?
General
