Need help?Do you have a question about the ED&D LT-952 and is the answer not in the manual?
Critical safety warnings and hazard information for using the leakage current tester.
Explains the tester's function in measuring leakage current per safety standards.
Defines leakage current and how it is measured according to safety standards.
Essential steps and warnings before operating the LT-952, including qualifications.
Details the various controls, switches, indicators, and connectors on the front panel.
Identifies and labels connectors and switches on the rear panel.
Step-by-step guide for measuring leakage current via the product's ground cord.
Procedure for measuring leakage current from a surface to a reference point.
Procedure for measuring leakage current between two exposed surfaces.
Instructions for measuring leakage current on products that cannot be isolated from ground.
Description of the circuits handling AC power input and DUT connections.
Details the electronics for measuring, scaling, and displaying leakage current.
Common causes and solutions when the meter fuse repeatedly blows.
Troubleshooting steps for a non-functional front panel AC receptacle.
Interpreting and resolving the '1' display indicating an over range condition.
Diagnosing issues with the meter display and ground indicators.
Diagnosing and resolving problems with the line fuse blowing.
Troubleshooting why near-zero leakage is measured for surface to reference.
General| Brand | ED&D |
|---|---|
| Model | LT-952 |
| Category | Test Equipment |
| Language | English |
To Next Page