Need help?Do you have a question about the Edax Element and is the answer not in the manual?
General| Brand | Edax |
|---|---|
| Model | Element |
| Category | Security Sensors |
| Language | English |
Exercise extreme caution. High Voltage is present and can cause burn, shock, or serious injury.
Use ESD handling precautions. Static voltages can destroy integrated circuits. Always ground yourself before handling electronics.
Electronics are not hot-swappable. Power must be off before inserting or removing modules, boards, or cables to prevent damage.
Details detector, analyzer, and DPP box cooling methods and requirements to prevent overheating and component failure.
Avoid close proximity or contact with high voltage components to prevent unsafe electrical discharge and window damage.
Details the power requirements for the workstation, monitor, and detector, including voltage ratings.
Provides physical dimensions and weight specifications for the workstation and detector.
Lists the operating conditions for temperature, humidity, barometric pressure, and air velocity.
Outlines the steps to start up the system, including powering the PC and detector, and launching the software.
Checks the DPP Box power light and Ethernet connection LED for proper startup and communication.
Explains how to check the detector cooling status via the Element Notifier utility and its LED indicators.
Describes how to start or stop detector cooling by clicking the 'Cooling On' button in the Element Notifier.
Suggests using remote access programs for system diagnosis and service.
Addresses loss of communication with the detector, showing a RED indicator and suggesting troubleshooting steps.
To Next Page