Edco 39600HD - Machine Safety Symbol Label Reference

HD-KL18-0623
Page 4
MACHINE SAFETY SYMBOL LABEL REFERENCE
This symbol means that the machine is heavy if the machine needs to be lifted onto or o󰀨 of a truck,
loading dock etc. that proper technique or heavy duty lifting device should be used, personal injury could result.
(Yellow background with black pictogram and black outline)
This symbol means that dangerous chemicals, gases, dust particles and/or fumes are present including
carbon monoxide. Proper ventilation must be maintained. Do not use gasoline/diesel/propane powered
equipment indoors.
(Yellow background with black pictogram and black outline)
This symbol means that there are sharp components and if feet/ngers/digits come in contact personal
injury or death could result.
(Yellow background with black pictogram and black outline)
This symbol means that potential hazardous voltages are present and the equipment must be properly
grounded and extreme caution should be taken. If for any reason maintenance or repair is needed,
insure that voltage(s) are disconnected at the machine and the source unless (be cautious) voltage needs
to be present to troubleshoot the problem, then only qualied personal should work on “live” systems.
(Yellow background with black pictogram and black outline)
This symbol means hazardous pressures are present. Caution should be exercised to prevent personal
injury or damage to equipment. Face, eye and head protection should be used.
(Yellow background with black pictogram and black outline)
This symbol means explosive and hazardous vapors are present. Caution should be exercised to
prevent personal injury to face and eyes. Breathing and personal protection should be used when
servicing.
(Yellow background with black pictogram and black outline)
This symbol means that the guards must remain in place while the engine/motor on the machine is
running because death or personal injury may result.
(Yellow background with black pictogram and black outline)
This symbol means that there are moving parts and if feet/ngers/digits are inserted under any edge of
the cutter/grinder/saw cover while the engine/motor on the machine is running that personal injury and loss
of foot/ngers/digits may result.
(Yellow background with black pictogram and black outline)
This symbol means the surface is HOT and that if ngers/digits/hands or any bare or unprotected skin comes
in contact with this surface or hot accessory, possible serious burns and personal injury may result.
(Yellow background with black pictogram and black outline)