edding in-line 12 - Assembly Notes

Page 4
Dimensions (L/W/H)
123.5 x 77.2 x 83.0 m
Weight
0.6 kg – without ink cartridge and mount
Operating environment
5–40 °C (41–104 °F) at 10–90 % humidity (non-condensing)
Quality
Made in Germany
Following ISO 9001, CIG 023, IEC 62368 (US)
1.2 Assembly notes
- To assemble the system, please read the “step-by-step section” above the graphical
representation or the graphic step-by-step tutorial stored on the printer (settings,
mounting instructions).
Ensure that all screws are tight and the device is protected against shocks and impact.
External damage such as bumps/knocks is not covered by the warranty.
Grounding of the housing is optional. It is recommended in case of static charging!