Edelbrock 1472 User Manual

®
SPECIAL INSTRUCTIONS
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
Trim the slots in the
gasket as needed.
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0230
®
SPECIAL INSTRUCTIONS
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
Trim the slots in the
gasket as needed.
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0230

Edelbrock 1472 Specifications

General

Product Type	Carburetor
Model	1472
CFM	600
Fuel Type	Gasoline
Finish	Aluminum
Number of Barrels	4
Choke Type	Electric
Part Type	Carburetor
New or Remanufactured	New
Material	Aluminum
Part Number	1472
Manufacturer	Edelbrock
Type	Carburetor
CFM Rating	600
Base Plate Material	Aluminum