Page 2 of 2
Brochure #63-5772
Rev. 3/07 - DA/mc
©2007 Edelbrock Corporation
Catalog #5772
WARNING: Support your vehicle with proper
jackstands or ramps rated for the total vehicle weight.
Place stands so that the rear axle is allowed to hang
free for easy system removal.
WARNING: These cat-back systems are engineered
to fit stock catalytic converters or equivalent replace-
ments. If your original system has been modified,
Edelbrock will not warranty fit or performance.
Overaxle Pipe Assembly
Intermediate Pipe Assembly
Muffler (SDT)
Band Clamp
Tailpipes (Polished)
Elbow (Left)
Elbow (Right)
KIT CONTENTS
Catalog #5772
Qty. Part # Description
1 55763 Muffler (SDT)
1 25-3164 I-Pipe
1 25-3060 Overaxle Pipe
1 25-3224 Elbow (Left)
1 25-3225 Elbow (Right)
1 25-3226 Tailpipes (Polished Stainless)
1 23-4068 Hanger Clamp
2 46-6612 3” Band Clamps
2 46-6611 2-3/4” Band Clamps
Edelbrock Corporation, 2700
California St., Torrance, CA 90503
Tech Line: (800) 416-8628
Office: (310) 781-2222
E-Mail: Edelbrock@Edelbrock.com
To Previous Page
Loading...
