Edge-Core ECS2100-10P

– 1 –
Quick Start Guide
10/28-Port Web-Smart Pro Gigabit Ethernet Switch
ECS2100-10T/ECS2100-10P/ECS2100-10PE
ECS2100-28T/ECS2100-28P/ECS2100-28PP
The ECS2100 series switches include the following models:
ECS2100-10T— 8 10/100/1000BASE-T + 2 SFP uplink ports
ECS2100-10PE— 8 10/100/000BASE-T + 2 SFP uplink ports (4 PoE ports)
ECS2100-10P— 8 10/100/1000BASE-T + 2 SFP uplink ports (8 PoE ports)
ECS2100-28T— 24 10/100/000BASE-T + 4 SFP uplink ports
ECS2100-28P— 24 10/100/000BASE-T + 4 SFP uplink ports (24 PoE ports)
ECS2100-28PP— 24 10/100/000BASE-T + 4 SFP uplink ports (24 PoE ports)
N OTE : The ECS2100 series switches are for indoor use only.
N OTE : For Safety and Regulatory information, refer to the Safety and Regulatory
Information document included with the switch.
ECS2100-10PE
ECS2100-10P
ECS2100-10T
ECS2100-28P
ECS2100-28PP
ECS2100-28T
E012016-AP-R01
150200001318A
www.edge-core.com

Edge-Core ECS2100-10P Specifications

General

Model	ECS2100-10P
Ports	10
PoE Ports	8
PoE Budget	130W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
MAC Address Table Size	8K
Power Supply	Internal
Power Consumption	Max 150W
Type	Managed Switch
Layer	2
Jumbo Frame Support	9K
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)

Summary

Unpack the Switch

Optional Console Cable

Details on the optional RJ-45 to DB-9 console cable for management.

Accessing Other Documentation

Information on obtaining additional guides like Installation, Web Management, and CLI Reference Guides.

Install the Switch

Rack Mounting Instructions

Steps for mounting the switch into a standard 19-inch rack using provided hardware.

Wall Mounting (ECS2100-10 PE)

Guidance for wall mounting the ECS2100-10PE model, including orientation precautions.

Ground the Switch

Connect Power

Verify Switch Operation

Make Initial Configuration Changes

Web-Based Configuration

Accessing the web interface via RJ-45 for initial switch configuration using default IP.

CLI Configuration

Connecting via the serial console port for command-line interface access with default credentials.

Connect Network Cables

Optional PoE Budget Extension

Hardware Specifications