EasyManua.ls Logo

Edge-Core ECS2100-28T

Edge-Core ECS2100-28T
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
– 1 –
Quick Start Guide
10/28-Port Web-Smart Pro Gigabit Ethernet Switch
ECS2100-10T/ECS2100-10P/ECS2100-10PE
ECS2100-28T/ECS2100-28P/ECS2100-28PP
The ECS2100 series switches include the following models:
ECS2100-10T— 8 10/100/1000BASE-T + 2 SFP uplink ports
ECS2100-10PE— 8 10/100/000BASE-T + 2 SFP uplink ports (4 PoE ports)
ECS2100-10P— 8 10/100/1000BASE-T + 2 SFP uplink ports (8 PoE ports)
ECS2100-28T— 24 10/100/000BASE-T + 4 SFP uplink ports
ECS2100-28P— 24 10/100/000BASE-T + 4 SFP uplink ports (24 PoE ports)
ECS2100-28PP— 24 10/100/000BASE-T + 4 SFP uplink ports (24 PoE ports)
N
OTE
:
The ECS2100 series switches are for indoor use only.
N
OTE
:
For Safety and Regulatory information, refer to the Safety and Regulatory
Information document included with the switch.
ECS2100-10PE
ECS2100-10P
ECS2100-10T
ECS2100-28P
ECS2100-28PP
ECS2100-28T
E012016-AP-R01
150200001318A
www.edge-core.com

Other manuals for Edge-Core ECS2100-28T

Question and Answer IconNeed help?

Do you have a question about the Edge-Core ECS2100-28T and is the answer not in the manual?

Edge-Core ECS2100-28T Specifications

General IconGeneral
ModelECS2100-28T
Switching Capacity56 Gbps
Forwarding Rate41.7 Mpps
MAC Address Table Size16K
Jumbo Frame Support9KB
VLANs4K
Weight3.5 kg
Storage Humidity5% to 95% (non-condensing)
TypeManaged Switch
Ports24 x 10/100/1000BASE-T, 4 x 1G SFP
Power SupplyAC 100-240V, 50/60Hz
Dimensions (W x D x H)440 x 200 x 44 mm
Operating Temperature0 to 50 °C
Storage Temperature-40°C to 70°C
Operating Humidity10% to 90% (non-condensing)
ManagementSNMP

Summary

Unpacking the Switch

Switch Installation

Rack Mounting

Mounting the switch in a standard 19-inch rack using provided brackets and screws.

Wall Mounting for ECS2100-10 PE

Instructions for wall mounting the ECS2100-10PE model specifically.

Grounding the Switch

Connecting Power

Verifying Switch Operation

Initial Configuration

RJ-45 Port Configuration

Configuring the switch via its RJ-45 management port using a web interface.

Console Port Configuration

Configuring the switch via its serial console port using a command-line interface.

Connecting Network Cables

Optional PoE Budget Extension

Hardware Specifications

Related product manuals