Need help?Do you have a question about the Edge-Core ECS410-52T and is the answer not in the manual?
General| Model | ECS410-52T |
|---|---|
| Switch Type | Managed |
| Switching Capacity | 104 Gbps |
| MAC Address Table Size | 16K |
| VLANs | 4K |
| Jumbo Frame Support | Yes |
| Weight | 3.5 kg |
| Humidity | 5% to 95% (non-condensing) |
| Jumbo Frames | 9KB |
| Management | CLI, Web, SNMP |
| Power Supply | Internal |
| Dimensions (W x D x H) | 440 x 44 x 44 mm |
| Dimensions | 440 x 44 x 44 mm |
| Operating Temperature | 0°C |
| Storage Temperature | -40°C to 70°C |
| Ports | 48 x 10/100/1000BASE-T |
| Layer | Layer 2+ |
| Power Consumption | 40 Watts |
Describes the RJ-45 console port for out-of-band management and configuration.
Details the AC power input socket on the rear panel and its requirements.
Lists the detailed technical specifications for the switches, including ports, buffer, bandwidth, and environmental data.
Outlines the sequential tasks required for installing the switch in a network.
Details the procedure for mounting the switch into a standard 19-inch equipment rack.
Details the AC power supply requirements and specifications for the switch.
Explains the procedure for properly grounding the switch chassis for safety and EMI requirements.
Guides on connecting the switch to a grounded AC power source.
Guides on installing Small Form Factor Pluggable (SFP) transceivers into the switch.
Details connecting standard Ethernet cables to the switch's RJ-45 ports.
Provides a troubleshooting chart to diagnose issues based on LED indicator status.
To Next Page