4
WARNING
Always unplug the Edge before cleaning the brush area as brush
may suddenly restart. Failure to do so can result in personal injury.
Before assembling your Edge Electric Powerhead for the first use,
be sure you have all parts.
1. Insert the wand into the opening located
on the neck of the electric powerhead.
The lower wand button lock will prevent
the wand assembly from detaching from
the Edge while in use.
2. Insert the hose handle into the wand
assembly. Insert the hose wall adapter
into the vacuum inlet valve. If your hose
has a “pigtail”, plug the 120V power
cord into the nearest electrical outlet.
To remove the wand, disconnect the power cord
and step on the wand release pedal, then pull up on
the wand.
WARNING:
Do not plug into electrical supply until
assembly is complete. Failure to do so could
result in electrical shock or injury.
ASSEMBLING YOUR EDGE POWERHEAD
Cord Management
Wand Connection
Thumb Saver
Button Lock
Adjustable Wand
Height Adjustment
Wand Release
Neck
Neck Release
Light
To Next Page
Loading...