Edge NVR User Manual

Edge , Quick Installation Guide
1. Description
This installation guide provides detailed information and instructions for the Edge network DVR
products. The Edge offers the remote live and playback function as a recording server.
• Front View
• Right Side View
Power On/Standby button
REC LED : Emitting during recording
Power LED : See ** below
Power On/Standby button
Network LED : Emitting when Ethernet cable connected
Network LED : Emitting when Ethernet cable connected
Sata hard disc drive
** Power status
Red : Standby state
Orange : In booting progress
Green : Normal state
Extra Sata connector : To expand hard disc drive
adding to installed drive inside

Edge NVR Specifications

General

Operating System	Embedded Linux
Video Output	HDMI, VGA
Form Factor	Rack Mount
Max. Recording Resolution	8MP
Max. Playback Resolution	8MP
Hard Drive Support	SATA
Audio Input	RCA
Audio Output	RCA
Network Interface	10/100/1000 Mbps Ethernet
USB Interface	USB 2.0
Video Compression	H.265
Operating Temperature	-10 °C to +55 °C (+14 °F to +131 °F)
Operating Humidity	10% to 90%

Summary

Product Description

Front View

Details the components visible on the front panel of the NVR device.

Left Side View

Describes the ports and features located on the left side of the NVR.

Rear View

Identifies the connections and indicators on the rear panel of the NVR.

Installation Procedures

Connecting Power and Network

Guides on establishing network and power connections for the NVR.

Connecting Alarms

Explains how to interface external alarm devices with the NVR's input/output ports.

Connecting RS232

Details connecting POS devices via RS232 serial port.

Connecting USB

Explains USB port usage for connecting external storage devices.

Connecting External SATA

Describes connecting external SATA HDDs for expanded storage.

Connecting the Power

Covers power adapter connection and initial LED status indicators.

Factory Reset Procedure

Instructions and caution for resetting the device to factory default settings.

Standalone Configuration

Details setting up the NVR in a single network environment.

Multi-location Configuration

Describes network configurations involving multiple geographical sites.

Network Connection and IP Assignment

Process to connect NVR to network and assign IP using SmartManager utility.

Connecting to the Website

Accessing NVR via web browser and initial setup wizard.

Camera Registration Process

Process for discovering and registering IP cameras with the NVR.

ONVIF Camera Setup

Detailed camera configuration settings using the ONVIF protocol.

Record Storage Setup

Setup and formatting of hard disk drives for video recording.