EdgeStar AP12005ECO - Installing the Window Kit Plates

EdgeStar Portable Air Conditioner 6

Installing the window plates
3. Open your window and place the window kit with
grooved side facing outward on the window sill. Then, slide
the window kit plate to fit the width of the window. You can
use screws to secure the window kit plate from sliding.
4. Lower the window to secure the window kit in place. You
may need to use duct tape to better secure the window kit.
CAUTION: Secure your
window by using window
locks. Please contact your
EdgeStar retailer to
purchase window locks.


