EasyManuals Logo

EdgeStar AP14001HS User Guide

EdgeStar AP14001HS
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
CONTROL PANEL
Power Control
Fan Mode
The power control turns the unit on and off
Air is circulated throughout the room with on cooling.
Note: unit does not need to be vented in Fan mode
Warning Light
Condensed water may accumulate in the unit. If
Heating Mode
the internal tank becomes full, the Warning Light
Heating is activated only when the ambient temperature
will shine and the unit will not operate until the
is below 77°F. In this mode, the desired temperature
unit has been drained.
can be set between 60°F and 77°F.
Note: When the device is in heating mode, both air
Mode control
hoses must be connected and led outside.
The Mode Control Has 4 settings:
Fan Speed Control
Cool Dehumidify Fan Heating
The settings are adjusted with Mode control
The Fan Speed Control has 3 Settings: High, Medium,
and Low.
button. A light will indicate which setting is
currently being used.
Cooling Mode
Timer
During the cooling mode the air is cooled and
Auto turn off:
hot air is exhausted to the outside through the exhaust
With machine in running mode, press timer button to
tube. Adjust fan speed and air temperature to suit
select number of hours you would like the unit to
your desired comfort level.
run in air conditioning mode until it automatically shuts
Note: The air exchange hoses must vent
off.
outside the room when using cool mode.
Auto turn on
With machine in standby mode, press timer button to
Dehumidify Mode
select number of hours until you would like the unit to
Air is dehumidified as it passes through the unit,
without being in full cooling mode. If room temperature
is > 77 degrees Fahrenheit, fan speed can be
adjusted; otherwise fan speed is fixed to “Med”.
automatically start running in air conditioning mode.
Timer / Temp set control/wheel
Note: The warm air exchange hoses must
vent inside the room when using Dehumidify
Mode, not outside as it does when cooling. If the
unit is vented outside some cooling will occur.
Used for adjusting the time and thermostat.
The default display is room temperature.
Air Conditioner Remote Control (batteries not included)
The functions work the same as your air conditioner’s touch controls.
All key function can be accessed from the remote control.
12
EdgeStar Portable Air Conditioner

Other manuals for EdgeStar AP14001HS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EdgeStar AP14001HS and is the answer not in the manual?

EdgeStar AP14001HS Specifications

General IconGeneral
BrandEdgeStar
ModelAP14001HS
CategoryAir Conditioner
LanguageEnglish

Related product manuals