Specifications
Model AP410HS
Maximum Room Size (cooling)* 400 ft²
Maximum Room Size (heating)* 400 ft²
Power consumption for cooling mode 1150W
Power consumption for heating mode 1050W
Air flow 212 ft³/m
Humidity removal capacity 2.11 p/h
Noise level <54 dbA
Power supply 120V/ 60Hz
Compressor Rotary
Refrigerant R-22 or R-470C
Refrigerant Load 450g
Timer 1-12 hours
Thermostat 61°-88°F
Net weight 71 pounds
Dimensions 29 1/4"h x 15"w x 14 3/4"d
Box dimensions 29 15/16"h x 21"w x 17 3/8"d
*Please note that maximum room sizes are under ideal conditions. Actual
cooling/heating areas may vary
Safety precautions:
1. Transport the portable air conditioner in an upright position only. If the unit is
tipped over, make sure it stands upright for at least 3 hours prior to turning it on.
2. Always place the unit on a level surface.
3. In order to cool, the hot air from the exhaust port in the rear of the portable air
conditioner must be exhausted outside the room.
4. Make sure the portable air conditioner is connected to a grounded power outlet.
5. This portable air conditioner is designed to operate in an ambient temperature of
61°-97° F.
3
To Next Page
Loading...
Need help?
General
