EasyManuals Logo

EdgeStar AP8000W Service Manual

EdgeStar AP8000W
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
9
5.4 Dehumidify Mode (Amber Light)
In this mode, the air conditioner will operate as a dehumidifier. Because the conditioned space is
closed or sealed, some degree of cooling will continue to occur.
If the room temperature is below 77ºF, the fan will always run on low speed while in dehumidify
mode.
If you do not use the exhaust hose in Dehumidifying mode, you must manually drain the water from
the unit. Additionally, the ambient temperature in the room will probably rise by a few degrees if you
do not use the exhaust hose.
You will be not be able to change the thermostat temperature or fan speed while in dehumidify mode.
5.5 Overflow Prevention
When water is detected in the reservoir for 3 seconds overflow prevention will occur.
The water light turns on.
5.6 Compressor Protection
If power is interrupted, the compressor will only restart after a 3 minute delay.

Other manuals for EdgeStar AP8000W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EdgeStar AP8000W and is the answer not in the manual?

EdgeStar AP8000W Specifications

General IconGeneral
Description of productPortable Air Conditioner
ModelAP8000W
ColorWhite
Voltage/FrequencyAC 115V~60Hz
Input Power840W
Current7.9A
Dehumidifying capacity71 Pints/Day
Timer24 Hour
CoolantR-410A
Weight and Dimensions IconWeight and Dimensions
Dimensions WxHxD19 1/4” 24 3/4” x13 1/4”
Weight56 lbs

Related product manuals