EdgeStar AP8000W - 5 Modes and Operating Conditions; Terms and Definitions; Cooling Mode (Blue Light); Fan Only Mode (Green Light)

8
5 Modes and Operating Conditions
5.1 Terms and Definitions
 TA: Ambient indoor temperature.
 TS: Set temperature.
5.2 Cooling Mode (Blue Light)
 The cooling temperature can be set from 61 to 89℉ (16 to 32℃.)
 The timer function works in cooling mode.
 The compressor will run when the difference between the set temperature and the actual ambient
room temperature conforms to the chart below:
 When TA≤TS (for 1 minute) the compressor turns off.
 When TA>TS+2℉ the compressor turns on.
5.3 Fan Only Mode (Green Light)
 If the temperature can’t be controlled by the selected mode and the room ambient temperature is
shown on the display the unit will default to fan only mode.
 The readout can only display a temperature of 32 to 99 ℉ (0 to 37℃.) lf the temperature is out of that
range the display will show LO or HI.
 The Timer function works in fan only mode.
(TA-Ts)℉
+2
0
Operation conditon
compressor off with a delay of 1 minute
compressor on