8
Operation
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
beverage cooler?
2. Have the installation instructions been followed, including connecting the machine to
electricity, and has proper grounding been installed for the beverage cooler?
3. Has the machine been leveled?
4. Is the beverage cooler in a site where the ambient temperature is between 50° F and
90° F all year round?
5. Is there a clearance of at least 5” at the back, 3” at the top, and 3” at the sides for proper
air circulation?
Adjusting the Temperature
The beverage cooler has a temperature range from 38°F to 65°F and will display the current
temperature.
Allow at least 24 hours before storing your beverages to allow the temperature to acclimate.
• Up Button : Press the button on the control panel to increase the temperature by 1
degree increments.
• Down Button : Press the button on the control panel to lower the temperature by 1
degree increments.
• Light Button : Press the button to turn the inner light on or off.
• Power Button : Turns the unit on and off. ( press and hold this button for approximately
3 seconds)
• The Celsius or Fahrenheit light will be lit depending on which temperature type is being
displayed. To switch between C and F. press and hold the light button ( ) simultaneously
for approximately 5 seconds.
To Next Page
Loading...
Need help?
General
