6
Important:
Once you are ready to install the beverage cooler directly on the floor, you must adjust
the feet to level the beverage cooler.
The beverage cooler only requires one large leveling foot and one small leveling foot. If
these are present then pieces are not missing.
The bottom of the back of the beverage cooler will sit directly on the floor.
Leveling the Beverage Cooler
It is important for the beverage cooler to be leveled in order to work
properly. In order to level the beverage cooler please use the following
steps:
1. Turn the small leveling foot on the right side of the refrigerator
to the right until completely tightened.
2. Place a carpenter’s level on top of the product to see if the
beverage cooler is level from front to back and side to side.
3. Turn the large leveling foot on the left side of the refrigerator to
the right to lower that side of the refrigerator or to the left to raise
that side of the refrigerator.
If you find that the surface is not level, rotate the large foot until the beverage cooler becomes
level. You may need to make several adjustments to level it. We recommend using a carpenter’s
level to check that the unit is level.
To Next Page
Loading...
Need help?
General
